Thread: dead ir2200!!
View Single Post
  #3 (permalink)  
Old 07-10-2008, 07:38 PM
yourownfree's Avatar
yourownfree yourownfree is offline
New member.
Field rep.
 
Join Date: Jul 2008
Location: Northstate California
Posts: 8
Rep Power: 0
yourownfree is on a distinguished road
Ok heres the fun. start unplugging the low DC lines from the power supply and see which line or connector it is thats draining the power supply. then find out where each line goes to. Had one with a dead supply and it was a 5volt line shorted. So i would say something is shorted. In my case it ended up being a sensor wire got under the lens cover and the cover when replaced the tech didn't see it and smashed it against the frame. Look at the history to see who and what they did last visit for repair.
Reply With Quote
 
Page generated in 0.20928 seconds with 22 queries